How to Calibrate TV on Your Own at Home with Step by Step

How to Calibrate TV

If you want to get a better image quality of the TV, then you need to know to how to calibrate TV. There is even a special and professional service for it, but it is costly. Not to mention that it is also time-consuming with special training and equipment. It doesn’t mean that you can’t do it on your own, though.

Get the Best Picture Mode

In general, the TV should have the so-called ISF picture mode providing complete settings for the calibration. Look for Theater or Cinema mode so you can start from there. In case those modes aren’t available, you can try the Custom mode. You may want to avoid the Sports, Game, or Vivid modes.

Warmest Color Setting

Color Setting

After you have found the right mode, then go for the Color Temperature. You need to set it to Warm. This is generally an accurate color scheme. From there, you can try accessing the RGB CMY or white balance calibration to reach the pinpoint accuracy (for the color levels) if you have the equipment. If not, then tweaking with the warmest (color) temperature present should do it.

Turn off the Picture Features – the Unnecessary Ones

You probably think that it is a good idea to have several picture setting tweaks options so you can ideally tweak the device. Unfortunately, they aren’t ideal for TV calibration. In how to calibrate the TV, the test patterns should be coming in fixed settings – and your TV isn’t adjusting itself automatically along the way.

When you access the Menu, find the Submenu sounding like Expert Picture, Picture Options, or Advanced Picture. Disable the features with Smoothing, Processing, Motion, Dynamic, and Adaptive on it. If you find the so-called Overscan, you should also turn it off.

Mind you, though, that disabling all the features with motion enhancing quality will reduce the soap opera effects. Motion enhancements are quite handy for video games or live sports, but the regular TV shows and movies will be just fine (and even better) to watch with those features being turned off.

Check the Picture Geometry

The most important thing about the TV setting and adjustment is to set it at the right display ratio. It isn’t about how you want to adjust the settings – it’s about the aspect ratio. If you have the cable boxes, it may present an issue especially if you are often switching between SD and HD channels. But if not, you can set everything up to the native resolution.

You need to find a button on the remote. Or go to the Picture Menu and access Aspect Ratio, Zoom, or Picture Size. Set it to Just Scan or Normal. Avoid choosing anything with Zoom, Wide, 3:4, or even 16:9 mode.

Set the Brightness

Don’t be fooled by this term because you will only tweak the black level of the TV. You only need to press right on the remote to test the Brightness. Do it until you see all the bars (in the middle) visible and then reduce it to only two bars.

Those are the general notes on how to do it all. Feel free to find other sources on how to calibrate TV that may suit your preference or your TV setting.